18mm KANGARO Miles B184 Cutter Blades

These are spare 18mm snap-off blades for any normal 18mm cutter knife. That is the standard heavy-duty size used on most workshop cutters. Made in India by KANGARO under the Miles brand, model B184/U10.

Each blade is 100mm long, 0.5mm thick and scored into 8 snap-off segments. When the tip goes blunt, you snap the old tip off and a fresh, sharp point takes its place, so one blade gives you 8 sharp tips instead of one. The edges are double-honed for clean cuts through leather, paper, card, vinyl and foam, and every blade comes with a light rust-preventive oil coating so it stays sharp while stored.

Two Ways to Buy. Just Pick One

👉 Buy 1 Pack if the blades are just for you. You get one plastic case with 10 blades inside.

👉 Buy 1 Box if you cut a lot, run a workshop, or teach a class. You get 10 sealed packs, 100 blades in total, and every blade works out 10% cheaper.

Both options contain exactly the same blade. The only difference is how many you get.

Will These Fit My Cutter?

If your cutter takes an 18mm blade (the wide, heavy-duty kind), these will fit. 18mm is a worldwide standard size, so these blades work in almost every large snap-off cutter whatever the brand. That includes our 18mm KANGARO Miles FA1806 G Heavy Duty Cutter, plus 18mm cutters from OLFA, NT and others.

These blades also fit our Leather Splitter, so if you use one, this is the blade to restock.

Not sure which size you have? Measure the width of your old blade. About 18mm wide (roughly the width of your little fingernail) means you need these. About 9mm wide (roughly the width of a pencil) means you need the 9mm Miles B94 blades instead.

What You Can Cut

Key Features

Specifications

Safety: These blades are very sharp. Snap off used segments with the snapper on the back of your cutter (or a pair of pliers) while holding the blade away from you, and drop the used pieces into a closed tin or bottle instead of a bin. Keep out of reach of children.