9mm KANGARO Miles B94 Cutter Blades

These are spare 9mm snap-off blades for any normal 9mm cutter knife. Those are the slim, pen-sized cutters used for detail and paper work. Made in India by KANGARO under the Miles brand, model B94-10.

Each blade is 80mm long and scored into 13 snap-off segments. When the tip goes blunt, you snap the old tip off and a fresh, sharp point takes its place, so one blade gives you 13 sharp tips instead of one. The edges are double-honed for clean cuts, and every blade comes with a light rust-preventive oil coating so it stays sharp while stored.

Two Ways to Buy. Just Pick One

👉 Buy 1 Pack if the blades are just for you. You get one plastic case with 10 blades inside.

👉 Buy 1 Box if you cut a lot, run a workshop, or teach a class. You get 10 sealed packs, 100 blades in total, and every blade works out 10% cheaper.

Both options contain exactly the same blade. The only difference is how many you get.

Will These Fit My Cutter?

If your cutter takes a 9mm blade (the thin, narrow kind), these will fit. 9mm is a worldwide standard size, so these blades work in almost every small snap-off cutter whatever the brand. That includes our 9mm KANGARO Miles SA903Y SS Cutter, plus 9mm cutters from OLFA, NT and others.

Not sure which size you have? Measure the width of your old blade. About 9mm wide (roughly the width of a pencil) means you need these. About 18mm wide (roughly the width of your little fingernail) means you need the 18mm Miles B184 blades instead.

What You Can Cut

Key Features

Specifications

Safety: These blades are very sharp. Snap off used segments with the snapper on the back of your cutter (or a pair of pliers) while holding the blade away from you, and drop the used pieces into a closed tin or bottle instead of a bin. Keep out of reach of children.