Columbus Edge Wax – Clear (25g)
Columbus Edge Wax – Clear (25g)
Couldn't load pickup availability
This is a small stick of clear edge wax made in Japan by Columbus. It is the last thing you put on a leather edge. Once the edge has been smoothed and burnished, a thin coat of this wax seals it, gives it a soft shine and helps keep out water and dirt.
Why does an edge need this at all? When you cut leather, the cut edge is raw and fuzzy, and the fibres soak up sweat, rain and grime. Burnishing presses those fibres flat. The wax then locks that smooth surface in, so the edge stays neat, glossy and water-resistant for longer. Because it is clear, it will not change the colour of your leather or your edge.
Where It Fits in Edge Finishing
Wax is the final step, not the first. A typical edge finish goes like this:
- Bevel the sharp corners off the edge with an edge beveller.
- Sand it level with sanding sticks.
- Burnish with water or Tokonole and a wooden burnisher until smooth.
- Wax with Columbus Edge Wax.
- Polish with a canvas burnishing cloth for the final shine.
Key Features
Fills tiny gaps left after burnishing and polishes to a clean, even shine.
A thin wax layer helps the edge shrug off water, sweat and dirt.
Adds shine without tinting, so it suits natural, brown, black or dyed edges.
Rub it straight on, or melt it onto the edge for a thicker, smoother coat.
Draw your stitching thread across the stick to help it glide and resist fraying.
A long-standing favourite among Japanese leathercrafters.
How to Use
Method 1: Rub on (quick and easy)
- Make sure the edge is burnished and completely dry.
- Rub the wax stick along the edge to leave a thin layer.
- Polish firmly with a canvas cloth or burnisher. The friction warms the wax and brings up the shine.
Method 2: Melt on (smoothest result)
- Melt a little wax onto the edge, for example by touching the stick to a warmed metal tool and running it along the edge.
- Let the wax cool and harden.
- Polish with a canvas cloth or burnisher until smooth and glossy.
For thread: pull your thread across the stick two or three times before stitching.
Specifications
| Specification | Details |
|---|---|
| Brand | Columbus |
| Colour | Clear (Neutral) |
| Net Quantity | 1 wax stick (25g) |
| Form | Solid wax stick |
| Best For | Final coat on burnished leather edges; waxing stitching thread |
| Country of Origin | Japan |
Tips for Best Results
- Burnish first. Wax seals whatever is underneath it, so a fuzzy edge will stay fuzzy. Get the edge smooth before you wax.
- Colour before wax. If you dye or paint your edges, do that first and let it dry fully. Wax resists colour, so anything applied on top won't take well.
- Thin coats win. A thin layer polished well looks better than a thick one.
- Try it on a scrap of the same leather before your project.
⚠️ Note: Wipe away any wax that lands on the face of the leather before polishing. Store the stick somewhere cool and out of direct sunlight, as wax softens in heat. Keep away from children.
Share
